The main function:

Hot plate welding machines mainly weld plastic parts through a temperature-controlled heating plate. When welding, the heating plate is placed between two plastic parts, and when the workpiece is pressed against the heating plate, the plastic begins to melt. After a pre-set heating time has passed, the plastic on the surface of the workpiece will reach a certain degree of melting. At this time, the workpiece will be separated to both sides, the heating plate will be removed, and then the two workpieces will be merged together. When a certain welding time and After the welding depth, the entire welding process is completed.

The equipment principle of vertical hot plate machine:

Heat the plastic components to be fused with a metal plate with a higher melting point than the material of the plastic parts, and heat the joints of the joints to be fused to melt the joints of the plastic parts. When the junction of the plastic parts is melted, the hot metal plate is removed, and the upper and lower plastic parts are pressurized to fuse the junctions.

Equipment characteristics of vertical hot plate machine:

This machine has the characteristics of simple structure, convenient operation and high production efficiency. After welding, it can meet the requirements of watertightness and airtightness, and is suitable for welding thermoplastic parts of various shapes, sizes and materials. It is a welding process that is widely used, economical and practical, and has high production efficiency.

Users can choose a multi-mode welding process according to the process characteristics, production efficiency and automation degree of various plastic parts. In one welding process, the welding of several plastic parts can be completed at the same time, and automation can also be used. A high-level multi-station hot plate welding machine for multi-station welding. A special multi-head hot plate welding machine with multiple welding surfaces can also be used to meet all the process requirements of one-time welding.

The scope of application of vertical hot plate machine:

Automotive industry: bumpers, instrument panels, fuel tanks, cylinder head covers, heat dissipation grilles for front and rear combination lamps, ventilation pipes, sun visors, etc.

other:

Steam irons, washing machines, vacuum cleaners, floats, large pallets and other large and irregular plastic parts that must be watertight, airtight and high-strength.

Hot plate welding is used for welding large irregular plastics such as car lights, washing machine balance rings, batteries, steam irons, and automobile water tanks.